Current Sensor

Select your product

Contact us

DISCONTINUED:
Clamping Current Sensor - Single Phase

The Clamping Current Sensor is a solid state transducer for measuring the current in fans, pumps and other HVAC equipment. The new clamping / split core current transformer allows installation without interrupting the high voltage wiring. It features AC input, range 10A, 20A, 50A jumper selectable, 0-5VDC out. The signal is proportional to the average current and vary slightly from the results shown on an RMS measuring ammeter, depending on the load.

ISCT01 - Clamping Current Sensor - Single Phase

Connection diagram

Specifications

  • Operating Temperature: -20 ~ 60°C
  • Operating Humidity: 0 ~ 95% RH
  • CT Material: ABS (UL94)
  • CT Ranges: 10, 20, 50Amp, jumper selectable
  • Output Signal: 1~5VDC; proportional to average current
  • Plastic housing: Flammability rating UL94HB
  • Window Size: 0.4” (10 mm)
  • Current Range: 0.25 - 40A AC
  • Ratio Error: <0.5% from 0.25 to 40A AC (typical)
  • Phase Error: <1.5° from 1 to 40A C and <2° from 0.25 to 1A AC
  • Wire Polarity: Red = Hi, positive(+); Black= Low, negative(-)
  • Phasing: Arrow On Case Points Orientation Toward Load Frequency
  • Range: 50 to 400 Hz

Features

  • Self-powered, no external power supply required
  • 0~5VDC output, connects directly to automation systems
  • One sensor for three ranges, jumper selectable
  • Low cost, replaces digital status relays

Dimensions